Hydraulic pancake maker
Features
This equipment is used in the cake-forming process of fiber dyeing production. It presses the loose fibers into cakes in a cotton cage after opening to obtain a fiber cake with fixed size, moderate tightness and uniform density that meets the requirements of the dyeing process. Main models: W-300, W-250, W-200, W-150, W-100
Main specifications
● Host configuration: host, hydraulic system, control console, filler cage
● Installed power: 18.5kW
● Host size: 3890×3160×3000 (length×width×height, user site pit is set up) 3890×3160×3700 (length×width×height, user site does not have a pit)
● Cotton stepping force: 5×10^5N
● Cage size: length, width and height can be determined according to the users dyeing cage size
● Others: Hydraulic cylinder with circulating water cooling device
Related Products
MACHINERIES
Pre-opening machine
Used in the production process of loose fibers to perform preliminary opening of wet fibers (short fibers with a moisture content of 40-60%) so that they can be fed into the wet starter more evenly to achieve a good opening effect.
MACHINERIES
Normal temperature loose fiber dyeing machine
● Primarily suitable for refining, bleaching, dyeing, and softening processes for various natural and man-made bulk fibers, including cotton, acrylic, wool, and cashmere. ● Specially designed high-performance, low-energy axial-flow circulation pump. ● Stainless steel heating coil built into the cylinder. ● Easy-to-operate, removable bottom sarong. ● Full-pass drain valve reduces operating time. ● Low liquor ratio approximately 1:4.
MACHINERIES
Cake topping machine
This machine is mainly used in the cake ejecting process in loose fiber dyeing or degreasing production lines. It is located after the dyeing machine and before the dehydrator. It ejects the dyed or degreased cotton cake from the cotton cage to obtain a well-shaped cotton cake, which is convenient for the implementation of the next dehydration process. It is one of the auxiliary units in loose fiber dyeing or degreasing production lines.
MACHINERIES
Dehydrator
This machine is mainly used in the cake ejecting process in loose fiber dyeing or degreasing production lines. It is located after the dyeing machine and before the dehydrator. It ejects the dyed or degreased cotton cake from the cotton cage to obtain a well-shaped cotton cake, which is convenient for the implementation of the next dehydration process. It is one of the auxiliary units in loose fiber dyeing or degreasing production lines.
MACHINERIES
Feeder
This machine is used for the post-processing of fibers after dyeing or scouring and bleaching. It is used to open and feed the refined staple fibers before drying, so that the wet fibers can be fed into the rotary screen dryer in a relatively evenly opened state.
MACHINERIES
Wet cotton opener
This product is mainly used for the opening step of cotton, cashmere and blended bulk fibers after dehydration, so as to achieve better drying effect after opening.
MACHINERIES
Rotary screen drying machine
This machine is suitable for drying bulk fibers such as wool, cotton, chemical fiber, etc. during the process. It can also be used for drying hemp, cotton, chemical fiber raw materials after dehydration.
MACHINERIES
Loose fiber dryer
This machine is suitable for drying bulk fibers such as wool, cotton, chemical fiber, etc. during the process. It can also be used for drying hemp, cotton, chemical fiber raw materials after dehydration.
MACHINERIES
Hydraulic lint baler
With hydraulically operated four-doors, single-sided wire threading, and the ability to add outer packaging during bale pressing, this machine is a specialized model for baling cotton lint. It is economical, practical, easy to maintain, and has an attractive appearance.
MACHINERIES
